Windows with film applied are easily cleaned without damage to their appearance as long as a few common-sense guidelines are followed:
‍
1. Use a soft clean cloth, soft paper towel, or clean synthetic sponge.
2. Use a soft cloth or squeegee for drying the window.
3. Use any normal glass cleaning solution which contains no abrasive materials.

The availability of scratch resistant coatings as a standard feature of quality films has virtually eliminated the need for extra special precautions in cleaning.

Whether window film should be used on low E windows and how much you will benefit depends on three factors:

1. Type of low E surface used on glass.
2. Location of low E surface in the window system.
3. The desired amount of heat gain reduction, heat loss reduction, or other film benefits.

There are two basic types of low E surfaces on glass. One of these is a conductive coating put on glass as it is being made. It gives some heat loss reduction, but does little to reduce heat gain into a building. The second type is a more complex system of multiple layers of metals and conductive coatings deposited on glass after it has been made. This type of low E glass gives heat reductions of 30% to 50% in addition to reducing heat loss. Obviously there will be more heat gain reduction using film on the first type. If there is any question about the type you may have, ask your glass company or the window manufacturer to send you the specific information about your glass.

The location of the low E surface in your window system is also very important in deciding whether film should be used. If the low E coating is on the room-side surface of the innermost pane of glass, the use of window film may reduce or eliminate the heat loss reduction of the glass itself. This may be more than offset by the heat gain reduction/heat loss reduction properties of the films to be used. Most low E window systems, however, consist of double pane windows where the low E surface faces the air space between the panes. In this case, film can be installed without eliminating the heat loss reduction benefit of the low E glass. The type of window film you choose for low E glass depends entirely on your desired benefit -whether you want to reduce heat gain, control glare, prevent heat loss, reduce fading or enhance the safety of your windows and glass doors. Carefully consider all these benefits before making a final decision.

It can reduce the impact of the sun’s UV rays or spectrum by 99%, which is a cause of fading.
There are six factors affecting fabric fading:

1. Ultraviolet Light
2. Visible Light
3. Heat and Humidity
4. Chemical Vapors (including ozone)
5. Age of Fabric
6. Dye Fastness

Clear single pane glass will reject 23-28% of the ultraviolet light from the sun. Insulated glass is slightly better, rejecting 36-41%. Window films installed on glass reject 95-99% of solar ultraviolet light.Different types of clear glass and window systems will reject 13-29% of the solar heat. With window films, 80% solar heat rejection can be obtained. No window film can eliminate fading. It can, however, offer maximum protection from fading due to solar ultraviolet light and solar heat.

Glass breaks when stressed. There are five types of stress which may cause glass breakage:

1. Thermal Stress–from absorption of solar radiation.
2. Tensile Stress–from the weight of the glass itself.
3. Mechanical Flexing Stress–from wind.
4. Impact Stress–from flying objects, hail, cricket balls.
5. Twisting Stress–from building or window frame sagging or settling.

The first type, thermal stress, is the only one which film may affect. The use of window films will increase the thermal stress on sunlit glass. However, there are also other factors which will increase thermal stress such as: partial shading of windows from overhangs, tightly fitting drapes or blinds, signs or decals on windows, heating and cooling vents directed at glass. In addition, different types of glass (annealed versus tempered, clear versus tinted) have different solar absorption rates and will withstand different degrees of thermal stress.